Hitork actuators used in PU water project in Indonesia

Hitork electric actuator multi-turn series entered the PU project in Indonesia for the first time, and this project has a high requirement for the number of turns of the actuator, which can reach 3000 turns.

The torque required to open and close the valve determines the output torque of the electric actuator, which is generally proposed by the user or selected by the valve manufacturer. As the actuator manufacturer, it is only responsible for the output torque of the actuator, which is required for the normal opening and closing of the valve. The torque is determined by the valve diameter, working pressure, and other factors, but due to the difference in the processing accuracy and assembly process of valve manufacturers, the torque required for valves of the same specification produced by different manufacturers is also different, even if the same valve manufacturer produces the same torque. The torque of the specification valve is also different. When the torque selection of the actuator is too small, it will cause the valve to be unable to open and close normally. Therefore, the electric actuator must choose a reasonable torque range.

Determine the electrical parameters according to the selected electric actuator. Because the electrical parameters of different actuator manufacturers are different, it is generally necessary to determine their electrical parameters when designing and selecting models, mainly including motor power, rated current, secondary control loop voltage, etc.